Position: Home > Product > Special robot
Permanent magnet crane magnetic suspension yq 1000 Linqing stone machine tool equipment

Price: Negotiable

Min.Order: 

Supply: 

Address: Asia-Pacific Australia

Hits: 173

Detailed description of the product
Product name: permanent magnet crane yq 1000
1. main uses and characteristics this series of strong magnetic hoists are mainly used to hold plate-shaped or cylindrical iron material workpieces during hoisting. they have the characteristics of light and skillful structure, convenient operation, strong holding power, safety and reliability, etc. and are beneficial to improving labor efficiency. therefore, they have been widely used as hoisting tools in factories, docks, warehouses and transportation industries. 2. main structure and parameters: the series of strong magnetic jacks are made of high performance magnetic permanent materials, which produce strong holding force in the magnetic circuit. it uses the handle to rotate the pole mandrel to make the jacks in working or closing state without external power supply. When the lifting device is in the working state, the suction surface at the bottom of the lifting device forms a pair of longitudinal magnetic poles, firmly holds the workpiece of iron material, and the suction surface is also provided with v - shaped grooves, so that the workpiece of the plate can be sucked and held, and the workpiece of the circular column can be sucked and held.
Usage method ( 1 ) strong magnetic hoist must be used within the rated lifting range. overloading is strictly prohibited to prevent accidents. ( 2 ) the thickness and surface quality of the workpiece to be lifted will affect the lifting capacity of the strong magnetic lifting device. therefore, please refer to the performance curve before use, and then the actual lifting capacity of the lifting device can be determined. ( 3 ) the material of the workpiece also affects the lifting capacity of the crane. the lifting capacity of low carbon steel workpieces can be 100 %, that of medium carbon steel workpieces is 95 %, that of high carbon steel workpieces is 90 %, that of low alloy steel is 75 %, and that of iron castings is 50 %. ( 4 ) when installing the rotating handle, the strong magnetic lifting device should be placed on the steel plate, so that the handle can rotate freely when the strong magnetic lifting device is energized, otherwise, it is very difficult to rotate the handle with very large force. ( 5 ) when lifting the workpiece, place the strong magnetic lifter at the center of gravity of the workpiece, then move the handle from the release position ( off ) to the suction position ( on ), check whether the slide key of the handle is locked by the positioning pin, and lift it only after confirming that the handle has been locked. ( 6 ) if a cylindrical workpiece needs to be lifted, the v - shaped groove at the bottom of the strong magnetic crane should be contacted with the workpiece, but the lifting capacity is generally 30 % to 50 % of the rated lifting capacity ( the size of the diameter is related to the decreasing lifting capacity ). ( 7 ) after lifting the workpiece, the button at the top of the handle should be lifted to disengage the sliding key of the handle from the positioning pin, and then the handle should be pulled to reset and release the position so that the lifting device is in a closed state, and finally the lifting device should be removed. ( 8 ) the environmental conditions for the use of strong magnetic jacks: 1. the environmental temperature is not greater than 80 degrees celsius 2. there is no violent vibration and impact 3. the surrounding medium is free of corrosive agents that corrode metals.
Main structure and parameters: the series of strong magnetic jacks are made of high performance magnetic permanent materials, which produce strong holding force in the magnetic circuit. it uses the handle to rotate the pole spindle to make the jacks in working or closing state without external power supply. When the lifting device is in the working state, the suction surface at the bottom of the lifting device forms a pair of longitudinal magnetic poles, firmly holds the workpiece of iron material, and the suction surface is also provided with v - shaped grooves, so that the workpiece of the plate can be sucked and held, and the workpiece of the circular column can be sucked and held.
Other products of the enterprise

MOST VIEWED

Friendship link    | International Artificial intelligence

News Exhibition Video Product Enterprise Picture Technology
Liaoning ICP No. 234234234 -1 | Liaoning No. 1102342342030919 public security